1.0/2.3 connector is one kind of RF connectors. 1.0/2.3 Connector is designed to have push-pull mating. Besides, 1.0/2.3 connector series are available for RF cables type, PCB type. 1.0/2.3 Connector commonly is used for 0~2GHz (75 ohm) and 0~4GHz (50 ohm)
Wellshow Technology manufactures various 1.0/2.3 connectors and custom 1.0/2.3 RF cable assemblies in Taiwan. We can provide good quality 1.0/2.3 connectors in short time and welcome OEM or customized RF connector. Contact us by email or call us 886-2-24270488 to start business!
1.0/2.3 Connector Series
All 1.0/2.3 Connector | |
1.0/2.3 Plug Connector
| 1.0/2.3 Jack Connector
|
Information
The 1.0/2.3 coaxial connector was developed in the 1990’s with a push/ pull mechanism allowing for 360 degrees rotation enabling flexibility in PCB layouts. 1.0/2.3 connectors conform to the DIN 41626, DIN47297, and NFC 93-571 specification.
1.0/2.3 connector have 50 and 75 ohm impedance and offer broadband capability from 0 to 4 GHz. 1.0/2.3 connectors are used in telecommunication, switching equipment.
Product Range
- Cable Connectors (straight and right angle) for flexible, semi-flex and semi-rigid cables
- PCB connectors (straight and right angle)
- Bulkhead panel mount connectors
- Adaptors
Application
- Cable Assembly
- Instrumentation
- Satcom
- Telecommunications
- Radio boards
- Base station
- Switching equipment
Dimensions
1.0/2.3 Interface Dimensions
1.0/2.3 Plug Connector Interface
1.0/2.3 Jack Connector Interface
Specification
1.0/2.3 Connector Technical Characteristics
| Electrical | |
| Impedance | 50 ohm or 75 ohm |
| Frequency range | 0 ~ 4GHz for 50 ohm |
| 0 ~ 2GHz for 75 ohm | |
| VSWR | Straight type ≤ 1.3 max. |
| R/A type ≤ 1.5 max. | |
| Dielectric withstanding voltage | 750 V rms |
| Working voltage0 | 250 V rms |
| Center contact resistance | ≤ 6.0 mΩ (Milliohms max.) |
| Outer contact resistance | ≤ 3.0 mΩ (Milliohms max.) |
| Insulation resistance | ≥ 104 MΩ (Megohms min.) |
| Mechanical | |
| Coupling | Push-Pull |
| Contact Retention | 4 lbs min. |
| Mating Durability | 500 cycles min. (For Beryllium copper contact only) |
| Environmental | |
| Temperature Range | Teflon −40ºC ~ +155 ºC |
| Materials | |
| Body | Brass |
| Insulator | Teflon |
| Center contact | Brass for male, |
| Beryllium copper or Phosphor bronze for female | |
| Crimping sleeve | Annealed Brass |
| Body plating | Nickel (Ni), Gold (Au) |
| Center contact plating | Gold (Au) |
Note: These characteristics are typical and may not apply to all connectors.
