BNC connector has middle size in various RF connectors. BNC Connector is designed to have two-stud bayonet locking and BNC connector series are available for RF cables type, PCB type and adaptors. BNC Connector commonly is used for 0~4GHz (50 ohm) and 0~1GHz (75 ohm) , but offers 11 GHz max.
Wellshow Technology manufactures various BNC connectors and custom BNC RF cable assemblies in Taiwan. We can provide good quality in short time and welcome OEM or customized RF connector. Contact us by email or call us 886-2-24270488 to start business!
BNC Connector Series
All BNC Connector | |
BNC Plug Connector
| BNC Jack Connector
|
Information
The BNC coaxial connector was developed with a two-stud bayonet mechanism for rapid and reliable connection and disconnection.
BNC low-cost connectors typically utilize die-cast and molded components, while performance will not be equal to the industrial or military grade products, BNC connectors are used in broadcast, CATV and CCTV applications crimped with 75 ohm coaxial cables like RG179, BT3002, 2.5C2V, RG59 and RG6U.
BNC connector have 50 and 75 ohm impedance and offer broadband capability from 0 to 4 GHz. The 75 ohm BNC can be used successfully up to 1 GHz.
Product Range
- Cable Connectors (straight and right angle) for flexible, semi-flex and semi-rigid cables
- PCB connectors (straight and right angle)
- Panel connectors in various flanges
- Adaptors
Application
- Antennas
- Cable Assembly
- Automotive
- Radios
- Telecommunication
- Satcom
- Surge Protection
- Base Stations
- Medical Equipment
- Instrumentation
- CCTV
- CATV
Specification
BNC Connector Technical Characteristics
| Electrical | |
| Impedance | 50 ohm or 75 ohm |
| Frequency range | 0 ~ 4 GHz for 50 ohm |
| 0 ~ 1 GHz for 75 ohm | |
| VSWR | Straight type ≤ 1.3 max. |
| R/A type ≤ 1.5 max. | |
| Dielectric withstanding voltage | 1500 V rms |
| Working voltage0 | 500 V rms |
| Center contact resistance | ≤ 1.5 mΩ (Milliohms max.) |
| Outer contact resistance | ≤ 2.0 mΩ (Milliohms max.) |
| Insulation resistance | ≥ 5 x 103 MΩ (Megohms min.) |
| Mechanical | |
| Coupling | 2-stud bayonet |
| Contact Retention | 6 lbs min. |
| Mating Durability | 500 cycles min. (For Beryllium copper contact only) |
| Environmental | |
| Temperature Range | Teflon −65ºC ~ +155 ºC |
| Delrin −55ºC ~ +85 ºC | |
| Coupling nut retention | 100 lbs. min. |
| Vibration | MIL-STD-202 Meth. 204 |
| Corrosion resistance | MIL-STD-202 Meth. 101 |
| Materials | |
| Body, coupling nut | Brass, Zinc alloy(diecast) |
| Insulator | Teflon, Delrin |
| Center contact | Brass for male, |
| Beryllium copper or Phosphor bronze for female | |
| Crimping sleeve | Annealed Brass |
| Body plating | Nickel (Ni) |
| Center contact plating | Gold (Au) |
Note: These characteristics are typical and may not apply to all connectors.
