MCX connector confirms to the European CECC 22220 specification in RF connectors. This MCX connector is jack/ female, and straight bulkhead type. This MCX jack bulkhead type can be terminated with RF Coax Cable RG178, RG196, 1.13mm, 0.81mm, 1.32mm, 1.37mm, 1.48mm,1.32DS 1.50mm, 1.38mm. Its plating is Gold over brass and the impedance is 50 ohm.
MCX jack crimp series not only have standard type but also have bulkhead type. MCX Connector commonly is used for 0~6 GHz. MMCX connector’s snap-on mating can reduce installation time successfully. If you have any special request of RF connector, RF coax cable and RF antennas, please contact us.
MCX connector jack straight bulkhead crimp type can be terminated with RG178, RG196, 1.13mm, 0.81mm, 1.32mm, 1.37mm, 1.48mm,1.32DS 1.50mm, 1.38mm RF coaxial Cable to be RF pigtails. Although it is a small component, it is charge in transmitting RF Signal. MCX RF connector is most commonly used in GPS Antenna cable, GSM Antenna cable or GPS/GSM application these kinds of RF industry.
Part Numbers
| P/N & Drawing | Description | Cable Group | Ohm |
|---|---|---|---|
| C08AB31178002B C08AB31148002B C08AB31137002B C08AB31132002B C08AB31113002B C08AB31081002B | MCX connector straight bh. crimp jack MCX connector straight bh. crimp jack MCX connector straight bh. crimp jack MCX connector straight bh. crimp jack MCX connector straight bh. crimp jack MCX connector straight bh. crimp jack | RG178, RG196 1.48mm, 1.50mm 1.37mm, 1.38mm 1.32, 1.32D 1.13mm 0.81mm | 50 50 50 50 50 50 |
